Kydex 6200 is a proprietary, high performance
thermoplastic sheet. It is designed for use in mass transit vehicles
such as subways, vans, buses, and trains. It meets the recommended
fire safety practices of both the Federal Transit Administration
(FTA) and the Federal Rail Administration (FRA) for smoke emission
and flammability as tested under ASTM E-662 and ASTM E-162. It is
the ideal thermoplastic for to solve your mass transportation equipment
needs.
SUGGESTED END-USES
Kydex 6200 sheet is specifically designed for mass transit railcars,
subway, and bus interiors where the UMTA requirements and/or Docket
90-A requirements must be met.Typical Applications include:
• Dashboards
• Seatbacks
• Armrests
• Tray tables
• Window reveals
• Cabin liners
FEATURES Kydex 6200 is available in over 200 developed colors, eight
surface textures, and thicknesses from 0.028" (.71mm) and up
enabling you to satisfy both the functional and aesthetic requirements
of any mass transit vehicle interior.
Kydex 6200 is easy to clean. Graffiti/spray paint, lipstick, ball
point pen, felt pen, grease, and grime are all easily removed using
cleansers such as Soft Scrub, Fantastic, and citrus -based cleansers
such as Citri Kleen HD. Ammoniated cleaners should be avoided since
they can leave a residue.
Kydex 6200 is very resistant to a wide range of concentrated chemicals
and solvents, so it withstands frequent cleaning with harsh cleaners
without fading or staining.
FABRICATION Kydex 6200 forms to deep draws with low forces when heated to
the upper range of 350°F to 390°F (176-199°C), and has unusually
high resistance to hot tearing.
Kydex 6200 sheet can be formed on all standard presses, and cut
on all standard die-cutting machines.
1All values
based on 0.125" (3.12mm) sheet unless otherwise specified. 2All gauges from 0.028" (.71mm) and greater.Not
intended for specification purposes.