StatNot™ Static Dissipative Laminate

StatNot™ Static Dissipative Laminate – StatNot is the superior high-performance composite to protect sensitive electronic applications from ESD damage. Its high temperature glass epoxy formulation is ideally suited to test, assembly, and manufacturing work surfaces, as well as any other situation where highly effective electrostatic dissipative protection is required. StatNot utilizes a newly formulated, proprietary high-strength conductive material, compounded as an integral part of the epoxy resin and impregnated into a woven glass substrate. This ESD material retains the high strength, dimensional stability, and chemical and thermal resistance of epoxy glass (G-10/FR-4), with the added feature of an ESD-resistant surface that will not rub off, wear or diminish over time. In addition, the StatNot (H-27210) material utilizes a high-temperature resin system which enables continuous operating performance to 360°F (180°C).

Protecting static-sensitive electronic applications such as:
• Automated test equipment
• Assembly fixtures
• Solder pallets
• Carrier pallets
• Enclosures
• Work surfaces

• High strength
• Excellent dimensional stability
• Five times the stiffness of leading thermoplastics
• Uniform thickness of ESD protection across the sheet, as compared to coatings
• Eliminates cracking and chipping
• Printable surface
• Cost-effective solution to ESD protection


Property StatNot™ 1 or 2 Surfaces H-27227 or
StatNot™ Throughout H-27210
Water absorption (1/8″ thick)
Hardness (Rockwell) (m scale)
0.069 lb/in.3
0.065 lb/in.3
Temperature-Index 285°F(140°C) 360F (180C)
Tensile strength (with gain)
Compressive strength (flatwise) -1/2″ thick
Flexural strength (1/8″ thick)
Bonding strength (1/2″ thick)
Impact strength (Izod)- edgewise with grain
Shear strength (1/8″ thick)
50,000 psi
60,000 psi
63,000 psi
2,600 psi
12 ft.-lb./in.
20,000 psi
46,400 psi
51,200 psi
56,300 psi
1,660 lbs
11.6 ft. -lb./in
22,100 psi
Volume resistivity
Surface resistivity
Surface resistivity (method PDS 44151 BA)
Static decay (EIA-541, NFPA 99)
Coefficient of thermal expansion: x, y
6 x 106 ohm-cm
12 x 10ohms/sq.
6 x 106 ohms/sq.
<2 sec.
18 x 10-6in/in°F
40 x 106 ohm-cm
15 x 10ohms/sq.
2 x 10ohms/sq.
<2 sec.
18 x 10-6 in/in°F
36 x 10-6 in/in°F


H-27210 StatNot throughout High-temperature glass epoxy
H-27227 StatNot one surface G-10/FR-4 glass epoxy
H-27228 StatNot two surfaces G-10/FR-4 glass epoxy
Size 4’x8′, 4’x9′  Other (non-standard) sizes
Thickness to specification
Color Black
[ ]    Welcome to Norva Plastics

Norva Plastics has been a full-service plastics fabricator and supplier of plastic materials. With over half a century in the business, we can tackle just about any job with confidence that comes from experience. From a tough prototype to long-run production, whatever your requirement, contact the experienced plastics fabricators first at Norva Plastics.

Norva Plastics provides many services relating to plastics and similar materials. We have 3 high precision CNC machines in house to handle high production jobs or for quick prototype jobs. We also do custom fabrication and also offer vacuum forming services. So contact us now! We look forward to serving you.