Kydex® T Impact Resistant Fire Rated Sheet
Kydex® T Impact Resistant Fire Rated Sheet – Kydex T is a proprietary acrylic/PVC thermoplastic sheet that is cost competitive with fire retardant ABS/PVC (FR-ABS) formulations but with significantly higher impact strength and extensibility. Unlike FR-ABS, because Kydex T is less hygroscopic, Kydex T typically does not requiring pre-drying; offers superior impact resistance 15 ft-lbs/in (801 J/m); more uniform forming with less wall thinning; and offers significantly greater resistance to a broad range of corrosive chemicals and cleaning solutions. It is available in a wide range of aesthetic choices and is UL recognized Std 94 V-0/5V.
• External housings for equipment such as photocopy machines, instrument panels, computers, keyboards, telephones, etc.
• Internal parts for equipment such as vending machines, air ducts, grilles, etc.
• Orthopedic braces
• Medical equipment parts (for example, centrifuge covers, blood analyzers, etc.).
• In-store displays
• Electrical equipment and any components requiring an UL 94 V-0 rating
Kydex T is formulated to substitute for FR ABS sheet with competitive pricing but superior cost/performance.
Kydex T has higher breakage resistance as measured by the Notched Izod test than competitive thermoplastics.
Kydex T is available in eight gauges from 0.028″ (.71mm) and up, in nine textures, a large variety of colors, custom blank sizes, and very low minimums.
Kydex T is among the most rigid of thermoforming materials, with a modulus of elasticity of 350,000 psi (2482 MPa).
Kydex T is easy to form with excellent part definition and deep-draw characteristics. It forms with similar forming times to FR-ABS making it easy transition from competitive products.
|PROPERTY||TEST METHOD||TYPICAL VALUE1|
|Specific Gravity||ASTM D-792||1.35|
|Tensile Strength, psi (MPa)||ASTM D-638||6,100 (42)|
|Elongation at Break, %||110|
|Flexural Strength, psi (MPa)||ASTM D-790||9,600 (66)|
|Modulus of Elasticity, psi (MPa)||360,000 (2482)|
|Rockwell Hardness, R||ASTM D-785||94|
|Notched Izod Impact Resistance, 73°F (23°C),ft-lbs/in (J/m)||ASTM D-256||15 (801)|
|Heat Deflection Temperature, HDT, @264psi (1.8MPa), annealed,°F (°C)||ASTM D-648||168° (75.5°)|
|Flammability Resist. Underwriter’s Lab2.||UL Standard 94
|Flammability Resist. Federal Aviation Admin.|
|Mold Shrinkage, %||0.4 — 0.6|
|Forming cycle time||Equivalent to FR-ABS|
|Forming Temperature, F (C)||325°-390° (163-200°)|
|1All values based on 0.125″ (3.12mm) sheet unless otherwise specified.
2All gauges from 0.028″ (.71mm) and greater. Not intended for specification purposes.
Full-service plastics fabricator and supplier of plastic materials
Norva Plastics has been a full-service plastics fabricator and supplier of plastic materials. With over half a century in the business, we can tackle just about any job with confidence that comes from experience. From a tough prototype to long-run production, whatever your requirement, contact the experienced plastics fabricators first at Norva Plastics.
Norva Plastics provides many services relating to plastics and similar materials. We have 3 high precision CNC machines in house to handle high production jobs or for quick prototype jobs. We also do custom fabrication and also offer vacuum forming services. So contact us now! We look forward to serving you.