Grades of Kydex Available

Grades of Kydex Available

Grade Description
KYDEX 100 Ultra high impact, high performance, fire-rated sheet suitable for broad range of demanding applications.
KYDEX T High impact, high performance, fire rated sheet. Cost competitive with flame retardant ABS but with greater impact and extensibility.
KYDEX 200 General purpose sheet with good impact resistance, excellent extensibility and solvent resistance. Cost competitive with many other thermoplastics.
KYDEX V Recycled grade of KYDEX black utility sheet. Excellent performance-to-cost ratio
Vinyloy 100 Recycled grade of KYDEX black utility sheet. Carries UL fire ratings of 94 V-0 and 5V. Excellent performance-to-cost ratio.
Vinyloy 102 Recycled grade of KYDEX sheet with a colored cap in select colors. Carries UL fire rating of 94 V-0. Excellent performance-to-cost ratio.
KYDEX 510 KYDEX sheet of any color with a clear, weatherable cap. Caps also available with black/white or rust/gray granite patterns.
KYDEX 550 Weatherable, monolithic (no cap) sheet in limited light colors. Excellent impact resistance.
KYDEX 101 White sheet with colored, weatherable cap to thermoform letter backs of electrical signage. Meets UL 746C and 94 V-0. Eliminates painting.
KYDEX 150 High performance sheet for building product applications. Rated Class I/A in gauges to .060″ (1.52mm); Class II/B in gauges to 0.093″ (2.36mm). UL listed.
KYDEX 160 High performance sheet for building product and clean room applications. Rated Class I/A and Class 10 in gauges to .125″ (3.12mm). UL listed.
KYDEX 130 High performance sheet with integral granite pattern in five colors. Rated Class I/A for non-wallcovering applications. UL 94 V-0 and 5V fire rating.
KYDEX L Damage resistant laminating material. Ratings of Class I/A and UL 94 V-0 in gauges to .040 (1.02mm). Can also be thermoformed and membrane pressed.
KYDEX 115 Rigid, sag-resistant ceiling panel grade in .080″ (2.03mm) thickness, available pre-cut. Class 10 rated for clean rooms. Also for food plants, computer rooms, operating rooms, etc.
KYDEX 6200 High performance grade for mass transit vehicle interiors. Meets FTA and FRA fire requirements.
KYDEX 6565 High performance grade for aircraft interiors. Meets FAR fire requirements 25.853 (a) and (d), and old (c).
KYDEX 1900 Mid-temperature aircraft grade with improved heat distortion characteristics for higher in-service temperatures 168-178°F (75-81°C). Meets FAR requirement 25.853(a).
KYDEX 6185 High-temperature aircraft grade with improved heat distortion characteristics for higher in-service temperatures 180-195°F (82-90.5°C). Meets FAR requirement 25.853(a).
KYDEX 100AS Anti-static sheet in full color range for electronic/electrical applications. Retains anti-static properties after forming.
KYDEX GND Conductive sheet in black only for electronic/electrical applications. Shields against static build-up. Retains conductive properties after forming.
KYDEX CL Clear sheet with smooth surfaces and protective mask on both sides. Chemical resistant and fire retardant. Meets FAR 25.853 (a).
KYDEX CL2 Clear, high impact sheet with smooth surfaces and protective mask on both sides. Chemical resistant and fire retardant. Meets FAR 25.853 (a). (pending)
KYDEX 107 For National Sanitation Foundation applications. Numerous textures/sizes, limited colors. Made with FDA approved raw materials. Cost competitive with ABS sheet.
KYDEX 120 High performance sheet that is USDA approved for incidental food contact in meat or poultry plants. Available in all gauges in white or beige.

Full-service plastics fabricator and supplier of plastic materials

Healthcare and Medical Plastics

Commercial and Industrial Plastics

Custom and Specialty Plastics

Plastics Machining and Fabrication

Security Plastics AND Materials

Plastic Sheets, RodTubes & Materials

Retail, Marketing and Advertising

Custom Designing AND Consultation

[ ]    Welcome to Norva Plastics

Norva Plastics has been a full-service plastics fabricator and supplier of plastic materials. With over half a century in the business, we can tackle just about any job with confidence that comes from experience. From a tough prototype to long-run production, whatever your requirement, contact the experienced plastics fabricators first at Norva Plastics.

Norva Plastics provides many services relating to plastics and similar materials. We have 3 high precision CNC machines in house to handle high production jobs or for quick prototype jobs. We also do custom fabrication and also offer vacuum forming services. So contact us now! We look forward to serving you.

[ ]    Location and Directions